 |
專業切割機，簡易的使用於招牌、車體廣告及賣場展示等方面。 |
|
產能最大，切割速度高達850mm (33")/sec。 |
|
機械解析度0.0125mm/step (0.00049") 的精密切割。 |
|
最重達 350 克的切割刀壓特性，甚至連較厚的材質都可切割 |
|
隨機附贈 Roland CutStudio*1軟體，針對Roland切割機開發的切割排版軟體。 |
|
自動四點定位功能*2，每一次都能夠準確的輪廓切割。 |
|
使用USB 或是RS-232 Serial，簡易的與電腦連線。 |
|
AdobeR IllustratorR and CorelDRAWR*3外掛的軟體。 |
|
可使用的三種尺寸: 1372mm、1178mm 和 915mm (54", 46" and 36")。 |
| |
*1 相容於 Windows®98SE/Me/2000/XP。
*2 此系統接受經由 Roland CutStudio 軟體和 Adobe Illustrator 的外掛軟體。
*3 外掛軟體相容於 Adobe Illustrator 9/10/CS/CS2 for Windows、CorelDRAW 10/11/12 for Windows 和 Adobe Illustrator 9/10/CS/CS2 for Macintosh。 |
| 機型 |
GX-500 |
GX-400 |
GX-300 |
| 機械結構 / 驅動方式 |
Friction feed / Digital control servo motor |
| 最大切割範圍 |
Width: 1195 mm (47 in.)
Length: 24998 mm (984-1/8 in.) |
Width: 1000 mm (39 in.)
Length: 24998 mm (984-1/8 in.) |
Width: 737 mm (29 in.)
Length: 24998 mm (984-1/8 in.) |
| 可接受材質寬度 |
Min. 90 mm (3-1/2 in.)
Max. 1372 mm (54 in.) |
Min. 90 mm (3-1/2 in.)
Max. 1178 mm (46 in.) |
Min. 50 mm (2 in.)/Max. 915 mm (36 in.)
(50 to 540 mm (2 in. to 21 in.),
582 to 915 mm (23 in. to 36 in.)) |
能被裁刀切割的寬度
|
0 to 1270 mm (0 in. to 50 in.) |
0 to 1067 mm (0 in. to 42 in.) |
0 to 812 mm (0 in. to 32 in.) |
| 刀具 |
Special blade for CAMM-1 series |
| 最大切割速度 |
During cutting: 850 mm/sec. (in all directions) During tool-up: 1202 mm/sec. (in 45 direction) |
切割速度 / 切割刀壓
|
10 to 850 mm/sec. (in increments of 10 mm/sec.) / 20 to 350 gf |
| 機械解析度 |
0.0125 mm/step (0.000492 in./step) |
| 軟體解析度 |
0.025 mm/step (0.000984 in./step) |
距離精度 (*1)
|
Error of less than ± 0.2% of distance traveled, or 0.1 mm (0.00394 in.), whichever is greater |
| 重複精度 (*1) (*2) (*3) |
0.1 mm or less |
| 傳輸介面 |
Serial (RS-232C-compatible), USB (Rev 1.1) |
記憶體
|
2 MB (buffer size: 8 MB) |
| 電源供應 / 電源功率 |
AC 100V to 240V ± 10% 50/60 Hz 1.2A / Approx. 100W |
AC 100V to 240V ±10% 50/60 Hz 1.1A / Approx. 95W |
| 機器外觀尺寸(含腳架) |
1602 mm (W) x 727 mm (D) x 1113 mm (H)
(63-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H)) |
1407 mm (W) x 727 mm (D) x 1113 mm (H)
(55-3/8 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H)) |
1144 mm (W) x 727 mm (D) x 1113 mm (H)
(45-1/16 in. (W) x 28-5/8 in. (D) x 43-13/16 in. (H)) |
| 機器重量(含腳架) |
55 kg (121.2 lb.) |
51 kg (112.4 lb.) |
44 kg (97 lb.) |
| 機器配件 |
Power cord, blade holder (XD-CH2), pin, blade, alignment tool, cable clamp, replacement blade for sheet cutter, USB cable, Roland software CD-ROM, setup guide, user's manual |
*1 According to material and cutting conditions as specified by Roland DG Corp.
*2 Excluding stretching/contraction of the material
*3 Range for assured repetition accuracy: For materials with a width exceeding 610 mm (24 in.): Length 4,000 mm (157-7/16 in.) (GX-500/400 only) . For materials with a width of 610 mm (24 in.) or less : Length 8,000 mm (314-15/16 in.)
|
| 隨機附贈軟體 |
Roland CutStudio |
Roland CutStudio Plug-in for Adobeｮ Illustrator® |
Roland CutStudio Plug-in for CorelDRAW® |
| OS |
Windows® 98SE/Me/2000/XP |
Windows®, Mac OS |
Windows® |
| Application Software |
— |
Adobe® Illustrator® 9/10/CS/CS2 |
CorelDRAW® 10/11/12 |
|
 |
切割刀
|
ZEC-U1715
|
For cutting sandblast stencils for friction feed, maximum 1.00mm thickness, offset value 0.25mm, 5-pack |
ZEC-U3017
|
For cutting sign vinyl in general plus cutting small letters or intricate designs, offset value 0.175mm, 3-pack |
ZEC-U5022
|
For cutting sign vinyl in general, offset value 0.25mm, 5-pack |
ZEC-U5025
|
For cutting thick, reflective and fluorescent vinyl, as well as sign vinyl in general , offset value 0.25mm, 5-pack |
切割刀座
|
XD-CH2
|
For sign vinyl in general as well as thicker material. Performs well for detailed cutting. Blade holder with blade extention adjuster, made of aluminum |
XD-CH3
|
For sign vinyl in general. Blade holder with blade extention adjuster, made of resin |
置紙架
|
HS-500
|
For GX-500, 1 set |
HS-400
|
For GX-400, 1 set |
HS-300
|
For GX-300, 1 set |
| 序列埠傳輸線 |
XY-RS-34 |
3m (9.8ft) |
|
