| |
|
CX-300 |
CX-400 |
CX-500 |
| |
機械結構 |
滾筒進紙 |
| |
驅動馬達 |
伺服馬達 |
| |
最大切割面積 |
29" x 984-1/8"
(737mm x 24,998mm) |
39"x 984-1/8"
(1000mm x 24,998mm) |
47" x 984-1/8"
(1,195mm x 24,998mm) |
| |
可接受材質寬度 |
2" to 36"
(50mm to 915mm) |
3-1/2" to 46"
(90mm to 1,178 mm) |
3-1/2" to 54"
(90mm to 1,372mm) |
| |
切割速度 |
During cutting:
850 mm/sec. (in all directions)
During tool-up: 1,202mm/sec (in 45?direction) |
| |
切割壓力 |
20 to 350 gf |
| |
機械精度 |
0.000492"/step (0.0125 mm/step) |
| |
軟體解析度 |
0.000984"/step (0.025mm/step) |
| |
距離精度 |
Error of less
than ± 0.2% of distance traveled, or 0.000394 (0.1mm), whichever is
greater |
| |
重複精度 |
0.1mm or less
(excluding stretching/contraction of the material)
Range for assured repetition accuracy
For materials with a width exceeding 24" (610mm): Length 157-7/16"
(4,000mm) (CX-400/500 only)
For materials with a width of 24" (610mm) or less: Length 314-15/16"
(8,000mm) |
| |
傳輸介面 |
Parallel (Centronics
compatible), USB (Rev. 1.1) |
| |
內建記憶體 |
2 MB (1.3MB for replot buffer) |
| |
傳輸語法 |
CAMM-GL3 (mode1and mode2) |
| |
電源功率 |
Maximum: 0.8 a/100 V to 240 V
± 10 % 50/60Hz |
| |
噪音值 |
Cutting mode: under 62 dB (A)
Standby Mode: under 40 dB (A) (According to ISO 7779) |
| |
外觀大小 |
45-1/16"(W) x 28-5/8"(D) x 43-13/16"(H)
1,144 mm (W) x 727 mm (D) x 1113 mm (H) |
55-3/8"(W) x 28-5/8"(D) x 43-13/16"(H)
1,407 mm (W) x 727 mm (D) x 1113 mm (H) |
63-1/16"(W) x 28-5/8"(D) x 43-13/16"(H)
1,602 mm (W) x 727 mm (D) x 1113 mm (H) |
| |
重量 (含腳架) |
101.4lb. (46 kg) |
116.8lb. (53 kg) |
130.1 lb. (58 kg) |
| |
基本配備 |
電源線: 1, 切割刀(ZEC-U5025): 1, 切割刀座(XD-CH3):
1, Alignment tool: 1, Cable Clamp: 1, 裁刀: 1, Roland software package:
1,
Startup Manual: 1, Safe Use Manual: 1 |
