MDX20d

快速的轉換 - 使用 MDX-20/15 能快速的檢查你的設計或是試做的局部產品和模型。精密的操作 - 掃描高至 0.05 mm (0.002'') 的解析度及以 0.00625 mm (0.00024'') / step 的速度雕刻，任何人可不經過訓練即可簡單的操作。簡易的使用 - MDX-20/15 相容於大多數的 3D CAD 軟體及支援工業標準的檔案格式包括 STL、IGES、 DXF。小巧的尺寸 - 適合你的工作環境。

	MDX-20	MDX-15
XY 檯面大小	220 mm (X) x 160 mm (Y) ( 8-5/8 in. x 6-1/4 in. )	170 mm (X) x 110 mm (Y) ( 6-11/16 in. x 4-5/16 in. )
最大工作範圍	203.2 mm (X) x 152.4 mm (Y) x 60.5 mm (Z)(8 in. (X) x 6 in. (Y) x 2-3/8 in. (Z))	152.4 mm (X) x 101.6 mm (Y) x 60.5 mm (Z)(6 in. (X) x 4 in. (Y) x 2-3/8 in. (Z))

最大的檯面載重	1000 g (2.2 lb.)	500 g (1.1 lb.)
傳輸介面	Serial (RS-232C)
控制按鈕	STANDBY key, VIEW key, TOOL-UP key, TOOL-DOWN key
LED	SCANNING MODE LED, MODELING MODE LED, VIEW LED
供應電源	Exclusive AC adapter (DC+19V 2.1 A)
噪音環境	Standby mode : under 35 dB (A) Operation mode (not cutting) : under 70 dB (A) (According to ISO 7779)
外觀尺寸	476.8 mm (W) x 381.6 mm (D) x 305 mm (H)(18-13/16 in. (W) x 15-1/16 in. (D) x 12-1/16 in. (H))	426 mm (W) x 280 mm (D) x 305 mm (H)(16-13/16 in. (W) x 11-1/16 in. (D) x 12-1/16 in. (H))

機器重量 (unit only)	13.7 kg (30.2 lb.)	9.6 kg (21.2 lb.)
操作溫度	5 to 40 (41 - 104 F)
操作溼度	35 to 80 % (no condensation)
配備	AC adapter: 1, power code: 1, Roland Software Package CD-ROM: 1, spindle unit: 1, sensor unit: 1, cap screw M4x15 : 4, tool:1, set screw M3x3 : 2, double-sided tape: 1, front cover: 1, hexagonal wrench (size : 3 mm) :1, hexagonal wrench (size : 1.5 mm): 1, positioning pins: 3, clay: 1, MDX-20/15 user's manual: 1

*The MDX-20/15 includes PS-6 (a spindle unit with a jaw diameter of 6 mm) as standard accessory. The MDX-20/15 for U.S. and Canada includes PS-1/8 instead of PS-6.

Modeling Functions
Tool chuck	6 mm or 1/8 in. tool chuck included
Spindle motor	10W (DC motor)
Software resolution	0.025 mm/step (0.000984 in./step)
Mechanical resolution	0.00625 mm/step (0.000246 in./step)
Revolution speed	6500 rpm
Feed rate	0.1 to 15 mm/sec. (0.00393 to 9/16 in./sec.)
Acceptable material	Wood, Plaster, Resin (modeling wax, styrenform), Chemical wood, Aluminum (A5052 according to JIS),Brass
Acceptable material
Acceptable tool	Endmil, Drill

Scanning Functions
Sensor	Roland Active Piezo Sensor (R.A.P.S.)Probe length 60 mm (2-5/16 in.), tip bulb diameter 0.08 mm (0.00315 in.)

Scanning method	Contacting, mesh-point height-sensing
Scanning pitch
(Dr. PICZA)	X/Y-axis directions -- 0.05 to 5.00 mm (0.002 to 0.20 in.)
Scanning speed	(settable in steps of 0.05 mm (0.002 in.))
Exportable file formats	Z-axis direction -- 0.025 mm (0.000984 in.)
	4E5 mm/sec. (1/8E/16 in./sec.)
	DXF, VRML, STL, 3DMF, IGES,
	Grayscale, Point Group and BMP

Spindle unit with tool chuck

Product number	Applicable tool shank diameter	Quantity per package
PS-3	3 mm	1 pce.
PS-4	4 mm	1 pce.
PS-5	5 mm	1 pce.
PS-6	6 mm	1 pce.
PS-1/8	3.175 mm (1/8")	1 pce.
PS-1/4	6.35 mm (1/4")	1 pce.

Engraving tool

dia = shank diameter W = blade width

Material	Product number	Specifications (unit = mm)	Quantity per package	Required Spindle unit
Cemented carbide	ZEC-100	dia = 6, 50L	1 pce.	PS-6
High SpeedSteel	ZEC-H2010	dia = 3.175, 110L x 0.10W	1 pce.	PS-1/8
	ZEC-H2032	dia = 3.175, 110L x 0.32W	1 pce.	PS-1/8
	ZEC-H2050	dia = 3.175, 110L x 0.50W	1 pce.	PS-1/8
	ZEC-H2075	dia = 3.175, 110L x 0.75W	1 pce.	PS-1/8
Cemented carbide	ZEC-U2032	dia = 3.175, 110L x 0.32W	1 pce.	PS-1/8
Cemented carbide	ZEC-U2050	dia = 3.175, 110L x 0.50W	1 pce.	PS-1/8

Product number	Specifications	Quantity per package
MM-40	Motor unit, 10 W / DC motor	1 pce.

*The spindle motor of the MDX-20/15 is consumptive. It is recommended to exchange the whole assembly for every 700 hour usage.

End mill
dia = flute diameter, R = flute radius, = flute length, L = overall length, d = shank diameter, NT = number of flute

Description	Product number	Specifications (unit = mm)	Quantity per package	Required Spindle unit
Square end mill	ZHS-100	dia = 1, 3 x 6d x 50L x 2NT	1 pce.	PS-6
Made of	ZHS-200	dia = 2, 6 x 6d x 50L x 2NT	1 pce.	PS-6
high speed steel	ZHS-300	dia = 3, 10 x 6d x 50L x 2NT	1 pce.	PS-6
	ZHS-400	dia = 4, 8 x 6d x 60L x 2NT	1 pce.	PS-6
	ZHS-500	dia = 5, 10 x 6d x 60L x 2NT	1 pce.	PS-6
	ZHS-600	dia = 6, 15 x 6d x 55L x 2NT	1 pce.	PS-6
	ZHS-3015	dia = 3, 15 x 6d x 50L x 2NT	2 pce.	PS-6
Square end mill	ZUS-300	dia = 3, 15 x 3d x 60L x 2NT	1 pce.	PS-3
Made of	ZUS-400	dia = 4, 20 x 4d x 60L x 2NT	1 pce.	PS-4
cemented carbide	ZUS-500	dia = 5, 25 x 5d x 60L x 2NT	1 pce.	PS-5
	ZUS-600	dia = 6, 25 x 6d x 60L x 2NT	1 pce.	PS-6
Ball end mill	ZUB-150	R1.5, 10 x 3d x 65L x 2NT	1 pce.	PS-3
Made of	ZUB-200	R2.0, 12 x 4d x 65L x 2NT	1 pce.	PS-4
cemented carbide	ZUB-250	R2.5, 20 x 5d x 65L x 2NT	1 pce.	PS-5
	ZUB-300	R3.0, 30 x 6d x 65L x 2NT	1 pce.	PS-6

*Please use a spindle unit for the desired shank diameter.

Product number	Specifications
ZW-100	75 mm(W) x 75 mm(D) x 38 mm(H),10 pcs.
ZW-200	175 mm(W) x 75 mm(D) x 38 mm(H),10 pcs.

Product number	Specifications
ZBX-15	550 mm(W) x 450 mm(D) x 462 mm(H) (21-11/16"(W) x 17-3/4"(D) x 18-1/4"(H))

[MDX-20/15 首頁][應用軟體][特色][詳細規格]